Turn Signal Brackets

Submitted by bill on

Repair of Front Turn Signal Fender Support Brackets

The spot welded (to the front fender) bracket under the front turn signal housing is another common corrosion sandwich. Welding the bracket/patch with a copper heat sink.

support bracket

Front fender turn signal brackets usually rust through right behind the signal housings. Above the bracket has been removed and cleaned up/patched and will then be welded back to the repaired fender. Again managing to save the original brackets.


turn signal 1


patch inside


patch 3


Repaired fender/bracket with new OEM turn signal light housing. These lights were still available from Toyota at the time of repair. Other after-market replacements are available but seem of lessor quality. 

repaired light