Martin Hammers

Note that hammers with fiberglass handles contain the letter "F" in the part number.

Hammer 105G
Martin 105G G Series Alloy Steel 1lbs Standard Ball Peen Hammer with Wood Handle, 14-1/4" Overall Length

G Series Alloy Steel 1lbs Standard Ball Peen Hammer with Wood Handle, 14-1/4" Overall Length

G Series standard ball peen hammer. Wood handle. Ball diameter: 1-5/32". Face: 63/64". Peen: 1". 4" Head length. HH105106FG replacement handle. 1.3lbs Weight with handle. Industrial black head finish. Alloy Steel Head Through Hardened. Polished Faces and Peen. American Hickory Handle Natural Shock Absorber. Made in U.S.A. Note: If a hammer head should loosen at any time, return it for handle replacement or a new hammer.

All Martin Ball Peens

Hammer 150G
Martin Hammer 150

Dinging Hammer

For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly” work. Faces, 1 1⁄4" and 1 9⁄16". Round heads, 6" overall. Weight 1.04 lbs. 150G 150FG

Hammer 151FG
Martin Hammer 151

Long Reach Dinging Hammer

For light dinging and long reach. Square face permits dinging close to molding or beading. Faces, 1 1⁄4" round, 1 1⁄16" square head 6" overall. Weight .85 lbs. 151G

Martin Hammer 152

High Crown Cross Peen Hammer

Two high-crowned faces for concave surfaces on doors, rear quarter panels, fenders and hoods. Faces 1 1⁄8", 6" overall. Weight 1.02 lbs. 152G

Martin Hammer 153

Cross Chisel Hammer

Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Round face 1 9⁄16" diameter. Chisel 3" long. Weight .87 lbs. 153G 153FG

Martin Hammer 153GB

Curved Cross Chisel Hammer

Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Well balanced curved chisel for work in close places. Round face 1 9⁄16" diameter. Chisel 3" long. Weight .85 lbs. 153GB 153FGB

Martin Hammer 153S

Cross Chisel Shrinking Hammer

Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces chisel end used on sharp corners. Flat round face 1 9⁄16" diameter. Chisel 3" long. Weight .87 lbs. 153S

Martin Hammer 154G

Bent Vertical Chisel Hammer

Excellent for finishing. Vertical chisel is bent for working in sharp corners, around moldings and for caulking. Round face 1 1⁄2" diameter. 5⁄8" Chisel 5 1⁄2" long. Weight .85 lbs. 154G 154FG

Martin Hammer 154S

Vertical Chisel Shrinking Hammer

Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces vertical chisel end used on sharp corners. Round face 1 1⁄2" diameter. Chisel 5 1⁄2" long. Weight .87 lbs. 154S 154SFG

Martin Hammer 155G

Fender Bumper

For bumping where hand and dolly cannot reach. Ample clearance for obstructions. Also used as a caulking iron. Length of head, 8 3⁄4". Weight 2.8 lbs. 155G 155FG 4

Martin Hammer 156G

Pick Hammer

Long-reach, thin point for low spot on low-crown panels. Reaches over inner obstructions. Face, 1 1⁄4" round point, 1⁄32" radius. Length of pointed end, 5 1⁄2". Weight .91 lbs. 156G 156FG

Martin Hammer 156GB

Curved Pick Hammer

Like 156G except pick end is bent in arc of normal blow. Reaches behind reinforcements to diffi cult spots. Face, 1 1⁄4" round point, 1⁄32" radius. Length of pointed end, 5 1⁄2". Weight .86 lbs. 156GB

Martin Hammer 158G

General Purpose Pick Hammer

Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face, 1 9⁄16" round point, 3⁄32" radius. Length of pick end, 33⁄4". Weight .91 lbs. 158G 158FG

Martin Hammer 158GM

Round Point Finishing Hammer

Blunt point long reach. For low spots on high crown panels and other work with long reach. Will not pick holes in the metal. Round face 1 9⁄16" diameter. Blunt point 3" long. Weight .81 lbs. 158GM 158FGM

Martin Hammer 158GMS

Sharp Point Finishing Hammer

Sharp point long reach. For low spots on high crown panels and other work with long reach. Round face 1 9⁄16" diameter. Sharp point 3" long. Weight .79 lbs. 158GMS

Martin Hammer 160G

Heavy Duty Bumping Hammer

For heavy gauge truck fenders and panels. Also used in straightening reinforcements, braces, etc. Faces, 1 1⁄4" round and 1 3⁄16" square head, 4" overall. Weight 1.1 lbs. 160G 160FG

Martin Hammer 161G

Dinging Hammer

Short-reach, lightweight. One low-crown, square face. Lightest dinging hammer in line. Faces, 1 1⁄4" round and 1 3⁄16" square. Head, 4" overall. Weight .83 lbs. 161G 161FG

Martin Hammer 162G

Shrinking Hammer

For work in close quarters. Expertly machined serrations on the round face. Plain square face, 1 1⁄8". Round serrated face, 1 1⁄4". Diameter 4" overall. Weight .78 lbs. 162G 162FG

Martin Hammer 164G

Utility Pick Hammer

Blunt point, short reach. For low spots in high-crown panels and other work with small clearance. Face, 1 9⁄16" round point, 5⁄32" radius. Length of pointed end, 2" head, 4" overall. Weight .75 lbs. 164G 164FG

Martin Hammer 165G

Pick Hammer

Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. Long reach, 18" handle. Weight 5 oz. 165G

Martin Hammer 166G

Pick Hammer

Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. 12" handle. Weight 4 oz. 166G

Martin Hammer 168G

Cross Peen Finishing Hammer

Used to bump odd fender or bumper contours. Round face 1 9⁄16" diameter. Peen end 3⁄16 × 7⁄8". 5" overall head length. 12" handle. Weight .91 lbs. 168G 168FG

Martin Hammer 168HC

High Crown Cross Peen Finishing Hammer

Ideal for forming radiuses, contours and curves – restoration, bike tank. High Crown face 1 9⁄8" dia meter, 21⁄4" radius. Peen end 3⁄16" × 1". 5" overall head length. 12" handle. Weight 1.0 lbs. 168HC

Martin Hammer 169G

Large Face Pick Finishing Hammer

For finishing and caulking. Round face 1 7⁄8" dia meter. 41⁄2" overall head length. 12" handle. Weight 1.0 lbs. 169G

Martin Hammer 170G

Door Skin Hammer

For high crown work and finishing, without poking holes in thin sections. 6 1⁄2" overall length. 12" handle. Weight .94 lbs. 170G 170FG

Tinner Riveting Hammers

Octagonal head with flat striking face and rounded cross peen. For driving & setting rivets and general sheet metal forming.

  • 4 oz. 9 1⁄4" 3 1 1⁄16" 9⁄16" 15⁄16" .38 25G (HH50 replacement handle) Martin Hammer 25G
  • 8 oz. 11 4 1⁄4" 3 ⁄4" 21⁄32" .76 26G (HH53replacement handle) Martin Hammer 26G
  • 12 oz. 13 1⁄2" 4 3⁄4" 2 9⁄32" 2 5⁄32" 1.1 27G (HH801 replacement handle) Martin Hammer 27G
  • 1 lb. 14 5 1⁄8" 3 1⁄32" 2 7⁄32" 1.4 28G (HH801 replacement handle) Martin Hammer 28G

Hickory Replacement Hammer Handles

Fiberglass Replacement Hammer Handles

Bird Publishing © 2014